Show filter
Showing 1–16 of 19 results
-
BRG 10G PRATLOCK
R41.09- Medium/High Strength.
- Low viscosity retaining grade for retaining bearings onto shafts, into housings or for bushes and other cylindrical close tolerance assemblies.
- Use this grade to replace press fits with slip fits.
- Colour coded lids, indicating strength.
-
NUTLOCK 6-10 10G
R41.95- Medium Strength.
- Typically for M6-M10 nuts and bolts.
- Allows disassembly using standard tools.
- Use on nuts and bolts.
- Colour coded lids, indicating strength.
-
PRATLEY 1-2-3 15ML
R54.79- Tough Acrylic (No gap filling properties).
- Easy 3 step bonding system.
- Excellent on aluminium and will join almost all well matched surfaces!
- Note: Shelf life of between 1 and 3 years, depending on storage temperature peaks.
- No Mixing required.
-
PRATLEY FROGEGGZ 50G
R44.95- Highly versatile Hand Mouldable Plastic. Mould just about anything in minutes!
- Sets hard & tough.
- Non-toxic and biodegradeable.
- Ideal for quick repairs and modifications.
- Can be drilled, sawn, sanded, filed, painted and pigmented.
- Use Pratley Glow-Powder to make it Glow-in-the-dark.
Packaging
- Dispensers of 20 Packs.
- Each pack contains 1 x 50g packet (50g hanging pack).
-
PRATLEY PRATLOCK GRADE H TEMP 50G
R116.21- High Strength.
- High temperature thread locker.
- Typically for M10-M20 studs and bolts.
- Disassembly difficult without extreme heat.
- Suitable for temperatures up to 230 degrees Celsius.
- Colour coded lids, indicating strength.
-
PRATLEY PRATLOCK GRADE HYD 50G
R136.57- Medium Strength.
- Suitable for fine threads in hydraulic and pneumatic connections.
- Replaces thread sealing tapes and pastes.
- Allows for disassembly with standard tools.
- Grade HYD is not recommended for use in pure oxygen, chlorine and strong oxidizing materials.
- Colour coded lids, indicating strength.
-
PRATLEY PRATLOCK PENTRG GR “PEN”
R90.78- Medium Strength.
- Ultra low viscosity thread locker for “wicking” into pre-assembled fasteners, press fits and knurls.
- Also suitable for sealing micro porosity in welds and castings.
- Colour coded lids, indicating strength.
-
PRATLEY Q/S WHITE GLUE 40ML
R51.34- Best suited for heavy duty applications where surfaces are somewhat rough.
- After mixing, it is thixotropic and has the consistency of soft butter.
- Can be used to fill large gaps where repair requires both adhesive strength and filler.
-
PRATLEY QUICKSET PUTTY 125G
R45.92- Exceptionally high strength, hand mouldable, putty-like adhesive.
- Similar to Pratley Putty Standard Setting (Original) except it sets faster.
- Can be used underwater, but is not as easy to apply underwater as Pratley Putty Original.
-
PRATLEY STEEL 40ML
R51.34- Very latest adhesive technology.
- Must be mixed thoroughly (approximately for 5 min), to ensure proper curing.
- Cures at a medium speed.
- Hand mouldable putty which sets like steel and matches the colour of steel.
- Exceptionally workable, yet when set it is an incredibly strong adhesive.
-
PRATLEY STEEL PUTTY 125G
R44.86- Very latest adhesive technology.
- Must be mixed thoroughly (approximately for 5 min), to ensure proper curing.
- Cures at a medium speed.
- Hand mouldable putty which sets like steel and matches the colour of steel.
- Exceptionally workable, yet when set it is an incredibly strong adhesive.
-
Pratley Steel Quickset
R46.00• Quick setting adhesive metal filler and mender
• Sets very hard and matches the colour of most ferrous metals
• Sets rigidly and can facilitate filing, sawing, machining and sanding within 2 hours -
PRATLEY WONDAFIX CAR 30ML
R52.38- Tough but flexible repair compound for a multitude of problematic car repairs.
- Black in colour and can therefore be used where colour is important.
- 2 : 1 mix ratio.
Packaging
- Dispensers of 20 Packs.
- Each pack contains 2 x tubes (30ml hanging pack).
-
PRATLEY-ORIGINAL PUTTY STD SETTING
R37.86- Was the first of it’s kind in the world.
- The only South African product to go to the moon!
- Hand mouldable adhesive which sets very hard.
- Ideal for underwater use.
-
QUICKSET CLEAR GLUE 40ML
R52.38- Very versatile adhesive which every family will find useful in the home.
- Can be used in applications where the adhesive should not be visible e.g. on ornamanents.
- Different from White Glue and is not thixotropic.
- Adheres to most rigid materials.
-
STUDLOCK 10-20 10G
R41.09- High Strength.
- Typically for M10-M20 studs and bolts.
- Disassembly difficult without heating.
- Use on studs, bolts and threaded pipe fittings.
- Colour coded lids, indicating strength.
